NAMELED FLAMENGO - LOGO LED LAMP

cults3d

A LED LAMP with Flamengo Soccer Logo. Clube de Regatas do Flamengo Rio de Janeiro - Brasil A modular lamp that can have integrated LED strips. You can choose a control system with a command or even via WI-FI on your mobile phone. Print two parts of the main body, so it fits well on a normal printer, and then glued with plastic glue on the identified inserts in a very simple way. 
The covers are printed on a clear material, which is translucent and illuminates. Cover parts are not glued, they are just fitted. Leds must be glued to the inner wall of the letters and pass between them in the existing holes. The entire printing is prepared with printing clearances, so that there are no problems. One body have diferent versions, to allow different electrical connections. An existing hole on the side, in the back or even without a hole to be able to drill wherever you want, or even use the logo lamp only as an ornament, without light. Size: aprox. 20x20 cm CUSTOMIZING ANOTHER NAME
If you want another personalized name with a Nameled lamp, contact by email to hstudio.pt@gmail.com and indicate the name you want. The name will be quickly created to be able to print. Can see here all names already available: Creations Summary of Assembly Steps: 1. Print letter one by one (fit in your printer without problems) 2. Print letter covers one by one (white or translucent) 3. Glue the letters in the correct order and in the existing notch 4. Glue a led strip to the inner edge, passing through the channels (Led 5050 model). 5. Make an electrical connection according to the model you are going to use. 6. Press the covers in place (they have a tolerance) 7. Place on the table or hang 8. Enjoy the magic.
--- To help, I leave here the indication of some parts that I use in the project: Led strips with control and transformer (complete solution) - Aliexpress Remote Control and strip controller for 5050 led strip - Amazon Plastic Glue Command 3 Buttons - Aliexpress or Here 3D PRINTING SETTINGS Infill - 8% 
Height - 0.3mm (nozzle 4mm) or 0,4mm (nozzle 6mm - preferred)
 Opaque color for letters, white color for covers.