Mystic Pinball backbox lamp baffle for crystal ball and 3D depth

prusaprinters

Files to print a bracket, light diffuser, lamp baffle and clips to keep it all together.The bracket is designed to be compatible with two of the existing metal baffle screws on the non-prototype mystic backbox door.  To fasten this well, consider drilling a hole on the upper portion for the third screw.The light baffle should be printed in a white PLA or semi transparent filament, and the extrusion pattern should be something compatible with this purpose (in my case, I used concentric circles and a textured build plate).The light baffle contains a groove which should friction fit with the bracket groove.The photo paper type graphic insert should be the same size as the light diffuser, and sit flat on this.The outside lamp baffle should then fit on top of the photo paper graphic sandwiched on the light diffuser.The clip can then be printed four time to friction fit the top baffle and light diffuser.-------- When using this mod, you will need to ensure you can either inset the bulbs on the backbox for this region, or use flat or bendable LEDs or some other flat type lighting that will not exceed the 5 mm gap between the backbox door and the light diffuser.---------- I am leaving the original mystic-baffle v1.step file for posterity.  This was a first run at a more simple lamp baffle for this region.