My MPCNC Mods

prusaprinters

All of my mods for my mpcnc primo F-25mm. STLs are oriented for printing. Everything prints without supports, except a few parts. Please refer to the description below and/or the included gcode. XY EndstopsHardware needed:2x M3x5x6 heatset insert, or shorter, should also work. For example, M3x5x3 should be fine1x M3x121x M3x45 Z EndstopHardware needed:2x M3 Self Tapping Screws1x Microswitch Corner BracesPrint with supports!Hardware needed:15x M5x2015x M5 Locknuts20x Screws for mounting on the table (I used DIN 7981) Nema 17 Drag Chain Mount with 2 Channel Relais (Gantry)Hardware needed:2x M3x10 and M3 Nuts for mounting the drag chain3x M3x10 and M3 Nuts for mounting the relais pcb1x M5x301x M5 Locknut Router ProbeHardware needed:8x 6x3 magnets, conductive (most are)(Optional) Glue for securing the magnets in place1x Wire1x Touchplate … or quick and dirty solder a wire to a blank PCB and use that ;) Assembly:Press first 4 magnets inInsert striped wire and loop it over all magnetsInsert last 4 magnets and press them flush MKS PI Detachable Case (with TS35 Screen)Hardware needed:12x M3x5x4 Heatset Inserts10x M3x102x M3x44x 6x3 magnets, conductive (most are)(Optional) Glue for securing the magnets in place(Optional) 4x DIN 7981 ScrewsVersion History21.01.2024 Initial Version22.01.2024 Added Z Endstop26.01.2024 Added Router Probe27.01.2014 Oriented all stl and added gcode with all mods20.02.2014 Added MKS PI Detachable Case