My Customized USB stick and SD card holder

thingiverse

This project is a customized version of Thingiverse model #46335, created with the Customizer tool available on http://www.thingiverse.com/apps/customizer/run?thing_id=46335. To assemble this custom designed case, follow these step-by-step instructions. Using the options listed below: 1. Set the Sign_HEIGHT to 6 units. 2. Add an extra layer of protection with USB_Extra set at 8 units. 3. Configure the SD_card slot with a gap size of 2 units for better insertion. 4. Customize the Pencil_radius by adjusting it to 4 units. 5. Space out the USB_stick slots at an equal distance using USB_gap, which is 4 units. 6. Define the order in which devices will be installed on this customized build plate using Device_Order = 1. 7. Move and position your object precisely using build_plate_manual_y, setting it to 100 units from the left edge, and placing the device perfectly by moving it forward along with manual positioning along the X axis using build_plate_manual_x at a distance of 100 units. 8. Customize the shape and size of the Sign by selecting between various predefined Sign_TYPE settings starting from index one. 9. Control and adjust the spacing for microSD_card gap as MicroSD_gap, adjusting it to a custom defined spacing with a default setting of 3 units, however users are free to modify or alter their preference according to individual needs. 10. Display personalized messages on your newly crafted object with customized font styles from a set predefined list and selecting orbitron sign FONT, type in any custom desired text inside the available SIGN_TEXT area provided on screen to have that message shown in this case as 'Goodall' and it has already been specified here for testing purposes only. 11. Define how many slots for storing multiple MicroSD_cards there will be placed around edge along its width at fixed predefined interval determined using variable sd_cards and placing SD_slots exactly with their respective spacing gap so total is of 10 on either side with option being configurable up to users' satisfaction. 12. Place connector sticks within predetermined gaps at given set interval for precise connection point between all attached hardware pieces using provided options where multiple such configurations can be tried before finding one that best suit requirement. 13. Decide what material and device specifications to use while designing this unique sign using provided parameters under the category 'Device Specifications.' Note: To generate the desired object with correct dimensions please remember these key things you should pay special attention to: Sign_FONT choice is already set to 'Orbitron', custom Text: "Goodall", with Pencil_gap being set to 3. Please confirm all options for compatibility before sending it to your 3D printer.