My Customized USB stick and SD card holder

thingiverse

A custom creation inspired by the innovative project found on http://www.thingiverse.com/thing:46335. Constructed using the Customizer application located at http://www.thingiverse.com/apps/customizer/run?thing_id=46335. Important instructions to guide users through this customized design: Custom settings used: USB Extensions are elevated by 1mm. The gap between SD cards is set to 2mm. A personalized name, Po Yuan, will be emblazoned across the sign. The diameter of pencil marks has been increased to 4mm. 8 memory sticks have been included in the device design. 3mm is the established gap between pencils. 0 sets the default plate as the construction base for this build. USB drive attachments have been amplified to 5 pieces. Type C connectors will be employed. Order one device for every individual. Select Orbitron font as the designated text style for the signage component of the system. Identify type number 3 devices for assembly purposes within this framework. Set manual placement for both the X and Y axis of build plates to a total distance of 200 units. Opt for device sign type A for implementation into final products and establish desired sign height at 6 inches. Further USB enhancements feature a 4mm gap between adjacent drives, while memory card compartments are set at 3mm. Parameters used: Device Type=3, Build Plate Selection Manually Entered in Decimal Coordinates for Location X =100mm, Location Y= 100 mm and Character Sign =1. The customized settings used on this build include Pencil Marks with Radius of diameter=4 units & the total height established as SD cards is equal to 8 units & USB Extension increased by One units as the other value was fixed with extra unit to match this system. The desired type in selected here equals one which can only support Type no=3. Device number selected should be more than three & Pencil width = three, Build selection used were fixed zero. Sign for orbitron and the size selected here has its radius diameter is 6 inches. The device design was set manually in a decimal with X location &Y = one hundred, micro sd Gap also established to Three & finally the final Device Type was selected with type of one to use at assembly purposes and only devices identified number were accepted to ensure compatibility at time construction starts with build plate at zero units fixed for both coordinate at both the side that we set.