My Customized Trophy

thingiverse

Customized version of http://www.thingiverse.com/thing:830500 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=830500 Instructions Using the following options: Top Peg Height is set to 9 mm. The distance between Y holes is fixed at 55 mm. Include the base is selected, setting it as an essential part of the structure. Peg Height is set at 4 mm, with Hole Depth adjusted to 5 mm. To align the pegs perfectly, a left offset of 50 mm is applied. The style of the base is chosen to be #1. Ten precise depressions are included in the design. A robust pillar stands tall at 100 mm, adding extra support and strength. There is exactly 95 mm space between the pillars in both directions (X and Y). Design Factor E equals 100 units for precise calculations. Dimension D, measuring 5 mm, sets the depth of holes accurately. Dimension C amounts to 15 mm, used as a standard measurement. B dimension equals 150 units for determining various sizes and positions. Dimension A, set at 150 units, helps with size verification and placement checks. Number_of_Pillars is configured to build exactly 4 sturdy pillars. Exactly 2 X-shaped pegs are integrated into the structure. A peg of diameter 5.5 mm fits neatly into pre-drilled holes for secure support. To ensure alignment and precise spacing, Y_Adjustment equals 0. Standard drill bit sizes set Hole_Dia to a precise measurement of 6 units. X_Adjustment is left untouched at 0, allowing for perfect alignment in both axes. The top plate is fully included in the assembly with the selected Include_Top_Plate parameter equal to #1. Pillars are constructed using Include_Pillars #1 and given pillar height. Perfect pegs made from Top_Peg_Diameter equals 5.5 mm material ensure strength. A base with a consistent thickness of 10 mm offers the needed structural integrity. Exterior radius measured in units, Outer_Dia is a round circle diameter set to a precise value of 20 mm for accurate measurements and size checking. To achieve intricate shapes for pillar design, select shape Pillar_Shape number #2. Two carefully positioned twists are part of the finished assembly with parameter Twists = 2 in mind for maximum strength. Y-shaped pegs at perfect spacing make up Number_of_Y_Pegs equal to two times, thus creating balance between Y holes on either side of an offset measured 50 mm away from one end towards the other as well as making sure that it maintains consistent distance between every y shaped holes all throughout so nothing appears off.