My Customized Parametric slew bearing

thingiverse

Customized version of http://www.thingiverse.com/thing:650155 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=650155 Instructions Using the following settings: bearing_height is set at 12 slew_gap is 1 inner_race_b is visible on inner race inner_race_a is also shown on inner race outer_race_screw_cap_depth is adjusted to 3 units gap_factor is calculated as 0.1 screw_diameter for the inner_race is 40 units in diameter visible_pins are shown screw_cap_diameter for the inner_race is set at 6 units in diameter hole_diameter for the screw on outer_race is set to 3 units visible_crossection is shown diameter for the gap is 95 units the flange has been set to 0 tolerance level is adjusted to 0.24 holes are cut for inner_race_screws with a diameter of 4 units similar holes are drilled for outer_race_screws in a count of 4 screw_cap_diameter on the outer_race is adjusted to 6 units outer_diameter for this project is set at 110 units flange_height is fixed at 8 units cap_diameter on the outer_race for screws has been fixed at 6 units inner_diameter of this design has a setting of 70 units screw_hole_diameter within the inner_race measures 3 units in diameter screw_diameter for outer_race_screws is set at 60 units visible_outer_race and show_outer_race options are selected