My Customized Parametric pulley - lots of tooth profiles

thingiverse

Created by the Thingiverse Customizer You're viewing a customized version of Thing 16627: A Retainer System and IDler System For Stepper Motor Mounts, a model created by dave.halpain. Using these settings: teeth: 20 additional_tooth_width: 0.2 mm nut_shaft_distance: 3 mm profile: round profile - profile width of retainer retainer_ht: height of the retainers: 1.5mm m3_nut_depth: thread depth for m3 nuts in IDler m3_nut_hex: diameter of nut hex head for idlers, set at .1 and max is .2 so it has to be lower pulley_t_ht: width or the pulley hub that mounts into shaft - defaults to 0 retainer: degrees of puller in nut holder = retainer setting m3_dia: hole for M3 screws from shaft no_of_nuts: Number of nuts required on each end idler_ht: height from shaft mounting point down to bottom idler part of bearing mount pulley_b_ht: height of the bearing block - default value is 1 pulley_b_dia: Pulley B diameter of pully in mm - this has changed m3_nut_flats: thickness and flat space above hex head on M3 nut A customized version.