My Customized Parametric pulley - lots of tooth profiles

thingiverse

Customized version of Thingiverse Design #16627 Created with Customizer: http://www.thingiverse.com/apps/customizer/run?thing_id=16627 Instructions: Use the following settings: Pulley bore diameter is set to 24 millimeters. An idler system is turned off. The M3 nut has a hexagonal shape and will be placed on one side. The distance between the M3 nut and shaft is set to 1.2 millimeters. The retainer ring height is adjusted to 1.5 millimeters. The diameter of the M3 screw thread is set to 4.5 millimeters. A single M3 nut will be used. The retainer is positioned three spaces away from the center axis. The motor shaft has a diameter of 8.3 millimeters. The pulley's tooth height is set to 12 millimeters. No additional tooth width has been specified, defaulting to zero. An idler with a height of 1.5 millimeters will be placed in the same position as the motor shaft. A gear pattern with 16 teeth and six cogs will be used. The pulley bore has a diameter of 8 millimeters and a height of 8 millimeters. Additional tooth depth is set to zero.