My Customized Parametric Music Box

thingiverse

Create a customized version of the music box available at http://www.thingiverse.com/thing:53235 using Customizer! Generate mid-gear with H = 3.3 and add a gear with H = 3, teeth holder width of 5, and 24 teeth. Add a crank gear with a 15-degree angle and generate a music cylinder with 24 teeth. Set the music cylinder name font to "write/Letters.dxf" and position it at depth 0.6. Include a case and set the note sequence as C, D#0E, F, F#0G, A, A#0B, C, DC#1D, D#1E, F, G#1G, A#1B, C. Adjust gear parameters to include a gap of 1, hold radius of 4, and tolerance of 0.1. Use a crank length of 18 and extra height of 4 for the crank. Set pulley H at 10, slack at 0.4, and snap lateral distance at 1.2. Add pin D = 1.5 and H = 3 with Y position of 35 and X position of 13. Design a music axis holder H = 3.4, mid-axis holder H = 3.3, gear holder R = 4, and pulley slack at 0.4. Set snap axis slack at 0.35, crank axis cutaway H = 4, and crank direction at 0. Generate a music cylinder, crank, and pulley. Use 924 g of PLA filament, wall thickness of 2, and CSG tolerance of 0.1. Set the FDM parameter to $fn=32. Include an axis slack of 0.3 and epsilon of 0.1. Display the music cylinder name as "test song" with font size 8 and font "write/Letters.dxf". Customize the mid-gear with 8 small teeth and large teeth of 20, while gear H = 3.3. Use a base frequency of C0 = 16.3516 and gear gap of 0.1. Design the music cylinder name depth at 0.6 and pulley minimum distance of D = 1.5.