My Customized NUT JOB | Nut, Bolt, Washer and Threaded Rod Factory

thingiverse

Instructions Using the options listed below: * step_shape_degrees: Set to 45 * nut_thread_outer_diameter: Adjusted to 5.3 millimeters * nut_type: Choose standard nuts * nut_resolution: Enhanced resolution set to 0.5 millimeter increments * head_diameter: Increased diameter of the head to 9 millimeters * thread_step: Spacing between threads adjusted to 1.125 millimeters * countersink: Deepen hole for socket or countersink, value 2 millimeters * nut_diameter: Outer circumference of the nut is now 7.7 millimeters in diameter * non_thread_diameter: Removed this option * thickness: Standardized to 2 millimeter units * slot_depth: Measure from outermost part and extended up to 2 millimeters within * nut_height: Set height at six full units, no adjustments applied * texture: Removed extra features such as textures since not needed * type: Type was specified by choosing the correct fastener (bolts) * slot_width: Reduced width slightly to one single millimeter increment only * non_thread_length: Not used; eliminated any unused feature or option. * outer_diameter: Full diameter for object is increased up 14 mm * wing_ratio: Maintains perfect equality with an angle ratio of 1 unit * inner_diameter: Core center or middle has eight mm set and stays the same. * nut_thread_step: Thread depth and detail adjustments made at each increment to 0.8 millimeters * nut_step_shape_degrees: Maintains same configuration and settings. * head_height: Measuring six whole units as is no modifications done. * resolution: The best and sharpest definition using a precision of five-hundredths of a unit in measurements or size. * drive_diameter: Standard and core driver fits inside perfectly 8 mm inner area with correct specifications * thread_outer_diameter: Proper setting of threaded part with standard thread outer circumference of the chosen diameter to seven. * drive_type: Specific screw head with cross marked area now made a Philips. * head_type: Head portion was selected with desired design socket type features. You may use this for creation in http://www.thingiverse.com or a custom project for production as specified by user inputs here listed above!