My Customized MK9 bowden extruder

thingiverse

Instructions for Using the Customized Model Using the following settings: mount Tolerance is set to 0.5 Number of Sides is fixed at 50 Stepper Distance for M3 screws is set to 31 Lever Extension is adjusted to 12 Countersink Depth for M3 screws is precisely calibrated at 3 Diameter of Holes for M3 screws is measured at 3.7 Thickness of Type 2 Frames is accurately set at 6.4 millimeters Thickness of Type 1 Frames is carefully adjusted to 6.1 millimeters Width of the Stepper Motor is established as 42.3 millimeters Body Width is kept constant at 9 millimeters Mirror Functionality is disabled by setting it to 0 Mount Angle is set to 45 degrees Fitting Depth for screws is securely locked in place at 6 millimeters Screw Length is precisely measured at 20 millimeters Width of Countersinks for M3 screws is maintained at 7 millimeters Diameter of the Fitting Hole is determined as 9.5 millimeters Mount Feature is enabled by setting it to 1 Layer Height in printing is set to a standard 0.2 millimeters Height of Type 2 Frames is adjusted to 40.2 millimeters Height of Type 1 Frames is carefully calibrated at 50 millimeters Custom Frame Thickness is precisely controlled at 6 millimeters Frame Type is chosen as 1 Filament Catch Protuberance is adjusted to 7 millimeters Custom Height of the Frame is fixed at 40 millimeters Diameter of the Filament Catch Hole is measured at 4 millimeters Offset from X-axis for filament is carefully set at 6 millimeters Offset from Z-axis for filament is precisely established as 10 millimeters