My Customized Maze

thingiverse

Create your customized version of http://www.thingiverse.com/thing:89785 with Customizer! This item is designed to be printed at a layer height of 0.3mm using PLA filament. The print will require support material for the overhangs. Use the following options when customizing your design: Wall Thickness (wall) = 1.5, Plate Height (plate_height) = 5, Tile Width (tile_width) = 6, and Wall Height (wall_height) = 5. Instructions: Follow the steps below to create your customized design. Step 1: Go to http://www.thingiverse.com/apps/customizer/run?thing_id=89785 and select the 'Customize' button. Step 2: In the Customizer, adjust the Wall Thickness (wall) to 1.5, Plate Height (plate_height) to 5, and Tile Width (tile_width) to 6. You can also adjust the Wall Height (wall_height) if desired. Step 3: Prepare your 3D printer by ensuring it is leveled and the filament is loaded. Set the layer height to 0.3mm and choose PLA as the material. Step 4: Upload your customized design file to your printer's software and slice it using the settings recommended by the Customizer. Be sure to generate support structures if necessary. Step 5: Print your customized design, remembering to monitor the print for any issues or errors. Once complete, remove the support material and enjoy your unique creation!