My Customized LairdWarp Rollercoaster

thingiverse

Instructions for Assembling Customized Desk Organizer: To create this customized desk organizer, you can utilize the options below: * Adjust plate position to match the dimensions specified on your build area. * Place the bump height at a fixed point of 1 inch to maintain structural integrity. * Determine support height by measuring and entering 5 inches into the parameter. * Set the thickness of supports by inputting 1 inch to secure structure in place. * Adjust rail diameters for both vertical and horizontal tracks using 5 inches as reference. When utilizing custom parameters: * V-bar heights should be aligned with a measured point at 200 inches. * Ear pieces should be installed or omitted based on requirement status, currently set to yes (1). * Insert the specified diameter of 12.7mm for each ball used within this system. * Use a build plate manual mode for alignment by setting selector to zero and manual settings accordingly. Additional Parameters: * Calculate optimal spacing using clearance factor as a guideline to avoid misalignment, currently at 0.1 inches from any nearby object or part in your design file. Final Settings Before Printing: Ensure accurate print placement and minimize errors by matching specified grid settings which consist of horizontal grid lines placed at 10 divisions per inch, vertical at 9 and X axes aligned across a custom defined matrix measuring 3 sections along X, ensuring maximum usability and minimal overlap. Parameters must match precisely within tolerances set or it will be difficult to make this assembly print smoothly