
My Customized Jellyfish - drooloops
thingiverse
Here's how to assemble and modify the device using a custom version of Thingiverse thing #243994, which you can create using our Customizer application located at http://www.thingiverse.com/apps/customizer/run?thing_id=243994. Assembly and Modifications: The assembly instructions for the device are as follows: - Place the lower support ring into place. - Secure the stig supports to the jf_support_radius support using the stig_height support piece. - Position the dl support rod between the stig_radius and jl_height rod support. Make sure that it's flush against the jf_radius part. - Attach the outer ring by pushing it through the upper portion of the jl_support_piece from within. - Attach a set screw to the lower end of each support using your fingers. Optional Modfications: Here are some optional modification options that you can add to the device to change its functionality or visual appearance. * Increase jf_height height, this is useful if the jfl_inner_ratio exceeds .7 and if jfl_outer_num has a value above 50. * You can modify the shape of your assembly by changing jl_support_piece's length in any direction by varying dl_width's length. If you prefer to give the assembly an oblique design you may choose the option 'Increase stig_radius.' You will also notice two additional holes at both ends on the support for more attachment points when customizing.
With this file you will be able to print My Customized Jellyfish - drooloops with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on My Customized Jellyfish - drooloops.