My Customized iPhone Stencil Case

thingiverse

Customized version of https://www.thingiverse.com/thing:58001 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=58001 Instructions Using the following settings: image_rotation: Set to 0 degrees. height_tolerance: Adjusted to 20%. cornerR: Increased to 8 mm. height: Selected at 9.5 mm. index_j: Fixed at index 1. index_i: Assigned as primary index. perimeter_tolerance: Toleranced at 50%. pattern_radius: Expanded to 17 mm. height: Chosen as 7.6 mm. perimeter_tolerance: Maintained at 50%. case_taper: Set to a taper value of 3. swidth: Specified as 6.1 mm. sthick: Configured for thickness at 1.0 mm. offY: Positional offset from Y-axis set to 0. offX: Positional offset from X-axis fixed at 0. iphone_version: Selected version 2 of iPhone design. height_tolerance: Set to a tolerance of 20%. pattern_shape: Configured pattern shape as number 6. width: Identified width as 58.55 mm. pattern_overlap: Defined overlap value as 18. type_of_case: Selected type of case as number 1. pattern_rotation: Rotated pattern by 13 degrees. image_scale: Enhanced image scale to 168 times. thickness: Determined thickness at 5 units. mashup_type: Configured mashup type as number 1. sthick: Confirmed sthickness at .6 mm. include_hooks: Disabled inclusion of hooks in design. length: Specified length as 123.8 mm. primary_color: Set primary color to red. width: Verified width at 58.6 mm. cornerR: Established corner radius as 8 units. swidth: Confirmed swidth value at 6.17 mm. length: Chosen length as 115.25 mm. case_thickness: Established case thickness as 2.4 mm.