My Customized iPhone 5s case tsc proven

thingiverse

Customized version of Thingiverse Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=58001 Instructions Using the following settings: Rotation - Image: Enabled Height Tolerance - Inner Diameter: 0.2mm Maximum Case Height: 9.5mm Default Joint Location Index i: 1 Default Joint Location Index j: 0 Corner Radius on Right: 8mm Perimeter Tolerance for Internal Circles: 0.5mm Pattern Radius: 12mm Height of Fifth Layer: 7.6mm Case Taper Value: 3 Degrees Perimeter Tolerance for External Circles: 0.5mm Wall Thickness on Left Edge: 1.0mm Inner Diameter on Right: 6.1mm Y Offset Value: -5.0mm X Offset Value: -1.0mm Version of Case Type for iPhone: iPhone Version 2 Tolerance on Fifth Layer Height: 0.2mm Shape and Rotation of Pattern Pieces: #7, Rotated by 21 Degrees Pattern Piece Thickness: 7mm Scale Factor Applied to the Image: 88% Maximum Internal Diameter - Width of Outer Circle: 58.55mm Rotation Value of Inner Circle: 21 Degrees Degree of Overlap Between Pattern Layers: 20 degrees Overall Length with Tabs Attached: 123.8mm Minimum Thickness of Top Edge: 0.6mm Mashup Design Type for Display: Option #1 ( Simple ) Attach Custom-made Joints to the Case: No Hooks are Included Radius at Inside Corners on Bottom Plate: 8mm Color of Main Body Material for the Case: Primary Color - Black Maximum External Diameter - Width of Outer Circle: 58.6mm Width of Left Side Wall for Fifth Layer: 6.17mm Final Height of Outer Edges of Top Edge with Bezel: 2.4mm