My Customized Iphone 5 / 5s / 5c case Minion

thingiverse

Customized Version of http://www.thingiverse.com/thing:835408 Created with Customizer! Https://www.thingiverse.com/apps/customizer/run?thing_id=835408 Instructions Using The Following Options: Pattern Thickness Equals 5 Height Is Set To 7.6 Length Of Object Equals 115.25 Height Tolerance Equals .2 Overlap Between Patterns Is 18 Width Equals 58.55 Type Of Case Desired Is Number 2 Image Scale Set At 185 Width Set To 58.6 Radius Of Inside Corner Ranges From 0 To 8 Mashup Style Is Selected Number 1 Primary Color Used For Printing Will Be Red Secondary Thickness Equals 1.0 Height Set To 9.5 Offset From Center Along Y Axis Equal Zero Offsetting Along X Axis Equal To Zero Rotate Image A Full Thirty Degrees Before Printing Case Slightly Thicker At The Edges, .4 Units In Depth Width At Inside Edge Equals 6.17 Second Thicknes Sets 1 Unit Per Dimension Corner Rounding Used On Inside Edges Will Be 8 Tolerance Between Printed Parts When Possible Set As No Using The Mashup Design Primary And Secondary Thickness Will Not Apply Input From User Is Disabled Pattern Of Holes Drilled In Object At Regular Intervals, Twenty-Three Degrees From Each Other Width At Outside Edge Of Object Set To Six Perimeter Tolarence Between Object & Wall, One-half Units Maximum Number 2 Denotes Apple IPhone Design This Feature Is Deactivated When Desired Patterns Are Used Inside And/Or Outside Edge Will Be Rounded Corner Rounding Used On The Object Itself Equal To Eight Both Sides Equally So Thickness Used To Print Is Six-tenths Of Unit For Pattern Inside Case, .6 Second Object To Taper Down Over Distance Of Three Units Pattern Of Interconnected Shapes In Rotation Equals Fourteen Radius Range From 16 Units Object Printed Is One Hundred Twenty-three Point Eight And Five Sixthths At Height Perimeter Tolarence Between Object & Wall Used Will Be Same Number Used With Thickness For Primary Color Used In Mashup Set To 0