My Customized House / Padlock Key

thingiverse

Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=52761 Instructions Using the following options: backslot angle is between 210 and 210 straight length is 27 or 22 units backslot z offset is -2 layer thickness to the left and -2 layer thickness below key ring radius is 4.5 or 4 units custom key text is provided top slot angle is 30 degrees both ways key cut code is 5802 key tip bottom y offset is key B slot Y offset plus half of blade height back slot Y offset is 2.75 or 1 unit above the base layer thickness is 0.3 units key blade width is 7 times layer thickness on both sides cylinder width is 2 or 1 unit in diameter key tip top y offset is key B slot Y offset plus key B slot height, or half of blade height minus key T slot height style of key is set to 1 key tip bottom angle is 225 degrees both ways pin step is one tenth of key T slot height on the left and right front slope height is 1.65 units above base level key head diameter is 25 or 20 units in diameter top slope height is 3.5 units high back slope height is 1.35 units high key tip top angle is 58 degrees or 50 degrees both ways front slot z offset is three times layer thickness to the left, and zero below base level key blade length is 28.5 or 18.5 units in length text size is between 5.5 and 4.5 points type of key is set to 0 layers thickness is set to 3 number of key cylinder is between 5 and 4 key blade height is 8.30 or 7.25 units high text separation is between 3.8 and 3.5 units apart