My Customized House / Padlock Key

thingiverse

Customized version of http://www.thingiverse.com/thing:52761 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=52761 Instructions Using the following options: Key ring radius is set between 4.5 and 4 inches. Text height is adjusted to between 5.5 and 4.5 inches. The diameter of the key head ranges from 25 to 20 inches. Polygon count can be set to eight or more. Pinstep size is determined by dividing the key's t-slot height by ten. Customized key text reads "Valdellora." Front slot y-offset is adjusted between 0.60 and 0.00 inches. Top slot angle is fixed at 30 degrees. Layer thickness is set to three layers each. Top slot height is maintained at 3.50 inches. Layer thickness remains at 0.30 inches. Front slot height ranges from 1.65 to 0.00 inches. Key blade length can be adjusted between 28.50 and 18.50 inches. Cylinder separation is set between 4.00 and 3.00 inches. Top slot z-offset is determined by multiplying the layer thickness by four or three. Back slot height remains at 1.35 inches. The number of key cylinders ranges from five to four. Back slot y-offset can be adjusted between 2.75 and 1.00 inches. Type of key is set to zero. Key blade height can be adjusted between 8.30 and 7.25 inches. First cylinder offset is determined by setting it to six or five inches. Cylinder width ranges from 2.00 to 1.00 inches. Text separation is set between 3.8 and 3.5 inches. The key cut code is set to six. Build plate selector is set to two. Key tip top angle can be adjusted between 58 and 50 degrees. Key tip bottom angle remains at 225 degrees. Key tip y-offset is determined by calculating the sum of back slot height and y-offset plus blade height minus t-slot height or key blade height divided by two. Front slot z-offset is set to three times layer thickness or zero inches.