My Customized GoPro mounts, and a library to expand

thingiverse

I'd be happy to create the customized version of the http://www.thingiverse.com/thing:62800 thing. Here are the options used for customization: * The gopro_bar_th was set at 3.2 * The gopro_bar_screw_d is 3 inches long * Primary structure design is a double setup * gopro_captive_protruding_h is fixed at 0.5 inches high * The diameter of the gopro_bar_screw_head_d is 6.2 inches * Gopro primary rod's angle from horizontal was adjusted to 45 degrees * Outer diameter of the nut in use on the gopro_rod_nut_od measures 8.05 inches * gopro_secondary setup requires three secondary pieces be made for each base unit * gopro_bar_screw_nut_d is a single turn locking device measuring 6.01 inches across * The primary structural bar and rod has an outer diameter of 31 inches, or half the width in length from base to tip * Distance from either side to edge for gap separation of primary structures within base unit setup, defined as gopro_bar_gap is set at a value of 2.4 The settings that allow secondary rotation were left unchanged by setting gopro_secondary_rotated at its default 0 degree position