My Customized GoPro mounts, and a library to expand

thingiverse

This customized version is based on Thingiverse's design with ID 62800, which can be further personalized using the Customizer app (http://www.thingiverse.com/apps/customizer/run?thing_id=62800). Key features of this design include a GoPro captive rod with a diameter of 3.8mm, a rod nut thread diameter of 3.6mm, and a bar thickness of 3.2mm. The rod nut outer diameter is 8.05mm, while the bar screw diameter is 3mm. The extension length is set to 30mm, with a shoulder thread thickness of 4.5mm for the GoPro bar. The bar's external diameter is 3mm, and there's a gap of 2.4mm between the rods. If desired, a secondary rotated rod can be added, but it's set to 0 in this design. The primary GoPro mount is a triple setup, with a bar-rod diameter of 15mm. The captive protruding height is 0.5mm, and the captive rod angle is 45 degrees. For the secondary mount, a clamp setup is chosen. Lastly, the bar screw nut diameter is 6.01mm, and the bar screw head diameter is 6.2mm.