My Customized Belfry mods to USB stick and SD card holder

thingiverse

Instructions for Creating a Customized USB Drive Design Using the Thingiverse Customizer Using the following design options, carefully consider each feature to achieve your desired USB drive configuration: Build Plate Specifications: Set the manual Y-axis value to 100 and the manual X-axis value to 100 to define the physical build plate. USB Cap Details: Determine the height of the USB cap by setting the value for USB_Cap_Height to 1.25 millimeters. Customization Font: Choose the font style, specifically "Orbitron," using the option labeled Sign_FONT. USB Customizations: Select four additional features beyond basic USB functionality with the variable USB_Extra set to 4. Select a Preferred Build Plate Size: Pick number three from the build_plate_selector list of available sizes. Determine Sign Height and Width: Define both the height and the vertical size of the sign element, using values for Sign_HEIGHT at 6 units and no additional specifications. Designating Devices and Gaps: Determine the preferred spacing between devices by setting USB_gap to six units. Pencil placement needs are met by setting a minimum distance (Pencil_gap) of three units from the adjacent element. Device Identification: Set up two SD cards (with gaps measured in MicroSD_gap), positioning them side-by-side on either end using device type and quantity selections of 5 for both devices and setting the variable device_order to value 1. This configuration dictates order when listing or organizing USB and card elements. Adding Custom Signage: Choose an appropriate message displayed at the center top area, specifically Belfry, utilizing option Sign_TEXT. Select the most preferred design category (Sign_TYPE) out of the provided list for your custom sign, selecting number one. Connector Style Choice: Define the exact type of connector employed on the customized drive with value zero ascribed to Connector_Type. Finalize Design Radius: Round Pencil Shape by defining the variable radius value to a maximum at 4 units for optimal usage. Finalized Setup Details: Review that your customization includes: SD_card_gap = two and Device Type= number three; confirm no additional features were added beyond described options, then proceed with implementation of these parameters into USB drives.