My Customized Belfry mods to USB stick and SD card holder

thingiverse

This design has been modified using the Customizer tool from Thingiverse, accessible at http://www.thingiverse.com/apps/customizer/run?thing_id=46423. Key Information: - Options employed for this design are as follows: - Device_Type: Set to three. - Pencil_radius: Adjusted to four units in diameter. - USB_Extra: Set to eight, adding extra USB connections for versatility. - SD_gap: Customized to have a gap of four units between microSD cards for easy accessibility and space management. - Device_Order: The order of devices has been set to one for simplicity. - build_plate_manual_y: Aligned the plate vertically at a height of 100 units in the customizer. - build_plate_manual_x: Adjusted the position horizontally, centering it within the defined boundaries on the 3D printing plate. This action places the project symmetrically within its bounds for balanced appearance and print performance. - Sign_TYPE: Specified that the sign be a singular entity rather than an element repeated multiple times for comprehensive impact. - Sign_HEIGHT: Determined the vertical size of the text to be ten units high, adding considerable emphasis to the name 'Adam' placed on it. - MicroSD_gap: Adjusted to provide gaps between each microSD card for easy insertion and retrieval by making this value three. - Sign_TEXT: Changed to 'Adam,' allowing any other string could replace 'Adam.' - USB_Cap_Height: The cap covering the connector, specified with a height of 1.25 units. - USB_sticks: Five standard computer sticks inserted. - Connector_Type: Established that there will be none or set the connection mechanism type to zero as it might need further details. - SD_cards: There should be only three, based on current specification - Sign_FONT: Altered font to 'BlackRose,' which is distinctive yet aesthetically pleasing for signage use. - USB_gap: A specified space around and above each computer port or socket set the extra separation of 6 units - build_plate_selector: Made a setting to the default plate used with current setup set to number two