Mushoku Tensei: Isekai Ittara Honki Dasu - Roxy Migurdia Staff

cults3d

This model is designed for Roxy cosplay from Mushoku Tensei. It is divided into 4 main parts, you can refer to the picture in the preview section. Each part is cut into pieces to fit in a printer with platform of 200mm x 200mm x 200mm. It is cut with easy printing in mind. All the parts come with flat face that can lay on the printing bed easily. There is no hanging part other than the tunnel that punch through the pole to the head, therefore, no support is needed other than the tunnel. Then tunnel have a diameter of 10mm which allow installation of bone from 7mm-10mm. Anything below 7mm will suggested to pump in some hot glue to hold the bone in place. There is picture with pieces labeled to their file names respectively in the preview section. You can refer to the picture for the pieces you want to print. Some picture with suggested arrangement on printing bed also included in the preview section. Once printed, glue pieces with a and b back to back using hot glue or PLA glue to form a part. After that join all the parts together to complete the prop. Bone can be added if needed by drilling multiple holes on the connecting face and bridge them with a iron or wooden rod. I will suggest doing part by part to avoid confusion. For scaling, please use the same scale factor for all the pieces. Cheers and Happy Printing!