Murasame from Akame ga Kill!

thingiverse

This is a one-to-one replica of the Akame's Murasame from Akame ga Kill If you want to print this, I strongly recommend only doing so if you have a print volume of at least 220x220x250 mm. Also big note: I kind of messed up with how Blade1 fits into the handle, because it doesn't fit. I just sanded down the thing with my dremel until it finally fit, but feel free to edit the stl beforehand if you don't wanna go through what I did. I'm super lazy to go back to this project, and want to move on with my other projects, so sorry if this makes me sound like a bad designer! For the handle, I printed with 70% infill with a brim. For the rest of the blade and the inscriptions, I scaled the model down to 99% in the slicer. *Blade1 should be 70% infill as well just to make sure the sword has a good sense of balance when you hold it Blade2-Blade5 should be 15% infill, and the infill for the inscriptions shouldn't matter. The handguard extension can be printed normally at 100% scale and 20% infill and a brim. I already oriented the model in a way that the bottom is the side that sticks to the handguard. Ignore the FullBlade file (unless you have one of those fancy belt 3D-printers, then that would totally be cool)