Multipurpose Twisted Knob

prusaprinters

<h4>Important Note:</h4><p>There are two configurations of this part:</p><ul><li><strong>Enclosed nut (</strong><code><strong>Twisted Knob - Nut.stl</strong></code><strong>):</strong> make sure to add a pause print at the layer above the nut in order to insert it. The nut may be a press fit depending on your printer's tolerance. The part is designed for a standard 1/4"-20 nut (.43" hex, .22" thick) with .005" of clearance on all sides. Make sure the nut is firmly pressed in to the hole to avoid collision with the hot end.</li><li><strong>Threaded (tapped) plastic (</strong><code><strong>Twisted Knob - Threaded.stl</strong></code><strong>):</strong> if you have taps available you can download the model with a tap hole to avoid inserting a nut into the part.</li></ul><p>&nbsp;</p><h4>Printing Notes:</h4><ul><li>If available, use a textured bed for a nice finish on the front surface of the handle</li><li>No supports needed</li><li>Adjust infill depending on the strength needed for the application</li></ul>