Multipurpose Table

IntroMy girlfriend gave me several MDF boards left over from a job, so I bought some wooden slats, printed a couple of pieces, and built myself a multipurpose table. This is an easy to print and easy to assemble table, no supports needed. I recommend using PETG or PLA+ as I did, with at least 50% infill. Parts:This parts are the ones I used, you could use any equivalent you have at hand. ÍtemDescriptionQuantity1Board (in my case 805 x 550 mm)12Wooden slat (40 x 40 x 700 mm)43Base_leg 3 (printed part) *44Coupling leg (printed part)45Plantilla A (optional) **16Plantilla B.1 (optional) **17Allen screw DIN 912 M4 x 20 x 0,7 mm 168Hexagonal nut DIN 934 M4 x 0,7 mm169Allen screw DIN 912 M6 x 30 x 1 mm ***410Hexagonal nut DIN 934 M6 x 1 mm ***411Phillips Flat Head Screws for Wood Number 8 D0,164 in L=2½ in412Phillips Flat Head Screws for Wood Number 8 D0,164 in L=1 in16Notes: (*) You must use a custom gcode to stop the printer at 42 layer to place the M4 nuts. (**) I like this tools because they have holes with a smaller diameter, so they are more precise.(***) You will only need this items if you print Plantilla A.Tools:ItemDescription1Phillips screwdriver PH12Allen wrench N 33Hand drill4Drill bit D2,75 mm