Multiple connectors or pegs for kbricks

cults3d

So you have played with kbricks enough to know that you want to build something big, but for that you're going to need more connectors, pegs and axle rings. A lot more. This uses the original design for connectors and pegs, but allows you to print a grid of them in one go. Choose Print long connectors; Print short connectors; or Print pegs, and how many you want (width x depth). If you set Print Supports to yes, then it prints thin connecting pieces at the bottom. I found that I had good enough build plate adhesion that this worked well. Once finish, just cut the parts out with a pair of scissors, and maybe finish up with some sandpaper if needed. If you prefer to print with a brim, then set Print Supports to false, and just add a brim with your slicer. Note that depending on how your slicer and printer work, you may find that printing parts this way works LESS well than just printing one at a time. This is because the printer will retract filament between parts. I found that it worked really well for the connectors, but not as well for the pegs. Do let me know in the comments if you have any suggestions or tips. Update Jan 2020: Added axle rings.