Multicolor Pickle Rick - for single color printers

thingiverse

For those of us without multicolor printers or painting skills here's a remix of the excellent Multicolor Pickle Rick model! I separated the pieces into individual files and scaled them slightly so they fit together seamlessly. Two models were printed: a 1X and a 2x. The pieces for the 1X are snug, but still fit perfectly. The pieces for the 2x model are loose, but assemble easily with just a dot of glue. Changes: Green (body) - left as is, no modifications needed. Blue (eyebrows) - scaled down to 95%. Black (pupils) - scaled down to 90%, using a small piece of black filament for the 1x size pickle. Black (mouth) - scaled down to 96% and trimmed by 1 mm from the bottom. White (eyes) - scaled down to 97%. White (teeth) - those teeth were tricky! Scaled each individual tooth for a smooth fit in the mouth, then joined them to the piece sliced off the bottom of the mouth. The teeth snap onto the mouth in one piece. Red (tongue) - scaled down to 87%. It slides into the slot in the mouth easily. If you can't get it to fit with your fingers, a little care with pliers will do the trick. The only tricky piece might be the teeth/mouth assembly. If you have trouble fitting it to the body, try scaling them down another 1 or 2% and see if that helps. Printing those pieces takes just a few minutes. This model is fantastic - I've made several and given them away as gifts. Huge kudos to the original designers! Now I'm saving up for that filament splicer! Update: Added a single-piece mouth, paint the teeth and tongue. Sorry again for the frustration caused by the multi-piece mouth! Update update: Added a second version of the single-piece mouth.