Mugi Nose Skid Wing Tips Skids & Motor Mounts

prusaprinters

Nose Skid for the Mugi Coreflute / Correx / Corro Flying Wing Plus some wing tip skids and motor mounts! Nose skid also has a hole in it so you can add a wheel. Or you can use the skid as a hook for bungy launching Raised platform keeps prop off the ground and 12 deg tilted motor mount for the Turnigy 2826 2200kV motor rounds out the picture. Print everything with 100% infill (i.e. solid) except for the nose skid. No need for support on the engine mounts or wing tip skids if printed as per the pictures. Print nose skid with 1.2mm shell / 4 layers and 30% infill as a minimum. Also as the base is curved use raft or supports. Print Settings Printer Brand: Anet Printer: A8 Rafts: Yes Supports: No Resolution: 0.15 or 0.2mm Infill: 30% for nose skid, 100% for everything else Filament: Any PLA Black Notes: Use raft of support for nose skid as base is curved. 30% infill and 4 layers minimum. Everything else can be printed 100% fill and no support if printed as per pictures. Category: R/C Vehicles