Mugen MBX-6T Truggy brushless conversion battery and ESC deck

thingiverse

Mugen Seiki MBX-6T brushless conversion battery and ESC deck This is to fit (up to) 6s Lipos with a dimension of up to 165mm x 45mm as well as an ESC in your Truggy that you converted to electric but kept the original base plate of the Nitro MBX-6T (not the "MBX-6T Eco" base plate!). It supports two straps to tighten the battery as well as to lead through the ESC throttle cable to your receiver if placed the way I did. In case your battery is a little smaller I suggest you put some foam rubber into the cage or simply resize the upper part. You can use up to 8 screws to pin this thing to the base plate, 7 screws need to be M3 and one is an M4 plus according nuts. I have a little extra plate on which my ESC sits, it is fixed with double sided foam rubber tape. That additional plate has two screw points so I added two more holes in the ESC base area to screw that down directly into the plastic base. In case you do not have this extra plate you can simply use two-sided foam rubber tape directly on the ESC platform of the "thing". I have split the deck into two pieces to both support smaller printers and to make printing easier to handle. I print this at speed 90 using PETG, tree support and 99.9% infill with Cubic Subdivision to provide robustness - enjoy!