Mudkip

prusaprinters

<p>ABOUT:<br>This is an Altered model of my own of the following: (not printable) Mudkip (Read Description).<br>This model can be found here:<br><a href="https://www.thingiverse.com/thing:4618841">https://www.thingiverse.com/thing:4618841</a><br><a href="https://www.prusaprinters.org/prints/112445-not-printable-mudkip-read-description">https://www.prusaprinters.org/prints/112445-not-printable-mudkip-read-description</a><br>This new model is printable! With a few modifications, I solved the bed adhesion issue I had by giving the model more surface area attached to the bed. In addition, I split the model into two. this allows for the body to be printed with more infill, solving the top-heavy issue I had. I also added my "XIAO" mark to the back of the body. I printed the one in pictures way too fast, so there are artifacts. as long as you stick to 100% speed, yours will turn out better.<br>PRINTING:<br>supports are needed<br>I suggest printing at .2mm of finer for both pieces.<br>The head is good at 15% infill, with the body being 30%<br>POST PRINT:<br>As long as you print at 100% scale or more, the pieces should just lay together. You can glue them if you desire.</p><p>Category: Creatures</p>