MRM Stiletto Parts

thingiverse

Multi Rotor Mania Stiletto Parts Repository - Get the official parts for the MRM Stiletto here. Make sure to choose the right part if it's associated with a motor or arm. ***All parts are designed to be printed from TPU or similar flexible materials*** Some parts require duplicates, so mirror and duplicate on the bed as necessary MRM Stiletto - Canopy: A sleek micro camera mount that offers full front protection for Foxeer, Runcam, or equivalent-sized cameras. It also includes RX antenna mounts. MRM Stiletto - Canopy - No Antenna: A simple micro camera mount that offers full front protection for Foxeer, Runcam, or equivalent-sized cameras. MRM Stiletto - Micro Camera Mount: Simple mounts for micro cameras like the Runcam Micro, Foxeer Micro, or equivalent. MRM Stiletto - SMA Antenna Mount: A standard SMA mount that also works with dipole antennas. It's a great option for routing your receiver antenna through it. MRM Stiletto - AXii Antenna Mount: An AXII u.fl or MMCX mount that provides a secure connection for your antennas. MRM Stiletto - 6mm Arm Protection: A protective cover for 6mm 5" arms. It extends the protection on the front and helps with launch preloading. MRM Stiletto - 6mm Arm Protection- Bland: A simple protective cover for 6mm 5" arms without any extensions. MRM Stiletto - 5mm Arm Protection: Protective covers for 5mm 4" arms. They extend the protection on the front and help with launch preloading. MRM Stiletto - 5mm Arm Protection- Bland: Simple protective covers for 5mm 4" arms without any extensions. MRM Stiletto - Soft Mounts: A soft mount option when you don't want to use arm protection. It provides a flexible and durable solution. MRM Stiletto - 20mm Stack Adapter - 2mm: An adapter used to mount a 20x20 FC and ESC stack. We highly recommend using PETG for this part! Make sure to tap the 2mm holes with a tap if you're using nylon hardware for the stack mounting. Also, make sure the frame bolts are flush with the top of the nutserts before installing the stack mount over the nutserts. MRM Stiletto - 20mm Stack Adapter - 3mm: An adapter used to mount a 20x20 FC and ESC stack. We highly recommend using PETG for this part! Make sure to tap the 3mm holes with a tap if you're using nylon hardware for the stack mounting. Also, make sure the frame bolts are flush with the top of the nutserts before installing the stack mount over the nutserts. 5mm Antenna Tube Mount: A secure antenna routing system that holds an antenna tube in place. Route your receiver antenna up through the small hole in the bottom and mirror it in your slicer to print the opposite side. We typically print all parts at a 0.2mm layer height in TPU, with 25% infill working well for these small parts. We also use 3 perimeters, 4 top & bottom layers, and support as required.