MPSM Handy Tool Holder

prusaprinters

<p><strong>UPDATE:</strong> Added an alternate version (<i>currently untested</i>) with the following changes:</p><ul><li>New slim dedicated section for a scraper (<a href="https://www.thingiverse.com/thing:13045">this one</a> - scraper model 2)</li><li>Wider general tool pocket behind the scraper section</li><li>New EDC utility blade slot (for <a href="https://www.thingiverse.com/thing:3713857">this one</a>)</li><li>Reduced support wastage and material use by removing most of long flat top lip</li><li>Reduced the gap between the printer body and the main body of the tool holder by 0.5mm (<i>which now causes a tiny lip which I'll fix in a future version</i>)</li></ul><p>A handy tool holder for the back of your Monoprice Select Mini V2.</p><p>This is another thing I designed purely to get to grips with Fusion360, but this time something I actually needed. The main reason was to have a safe place for my Scraper Handle as I have small people in the house, but it's handy for iFixit drivers, tweezers, pens etc, plus I added a dedicated holder for the MPSM hex key. I also added hooks on the back for 'things', where I currently keep my EDC Utility Blade Holder.</p><p>I printed it right-way-up, adding supports for the ledge with the screw holes, that way the hooks on the back came out clean (the hooks shouldn't need supports due to the angles). Took about 6 hours at 0.175 (I think), plus my first layers are dead slow. Printed with <a href="https://thepihut.com/products/jet-black-pla-filament-1-75mm-1kg">3DQF Jet Black PLA</a>.</p><p>If you like it/print it, show us your make!</p>