MPMD SKR 1.3/1.4/SKR E3 Mini 1.2 Overhaul Kit

thingiverse

Feel free to remix or download piecemeal. I recommend printing in PETG or PLA Pro; even the bed deck should be fine in PLA Pro as long as the bed is insulated. More updates are coming, so stay tuned. Hardware you'll need: M3x30 bolts x6, to mount the board housing where the old fan plate was. M3x15 bolts x4, to mount the board to the housing M3 nuts x4, for the above M3x12 bolts x4, to mount the Pi to the board (no nuts needed). Mandatory files: The actual board housing - with or without RasPi - is mandatory. You can use your stock hot end, hot bed, and most everything else - except the power plug, which can be something like this: https://www.amazon.com/JacobsParts-Adapter-Female-Pigtails-Security/dp/B00QJAW9F4 Or the power supply wire can be stripped and routed directly inside of the board housing. Most everything else either transfers over or requires minor modification. Optional: Extruder downstream swap is entirely optional - it cuts about 1/3 of the PTFE. The screen adapter isn't required, however that's what I use for a TFT32 display. You don't have to use a TFT 32 - TFT24,28, or even 35 will work, or even an LCD2004 - just post a remix so everyone else can use it. The included fan side-plate is for 40mm fans, specifically the Noctua. I highly suggest using that one, as it's quieter and sends a ton of air through. The best config would be 4020 intake fan, and a 4010 exhaust fan - or possibly even a passive exhaust (which I'll be making a vent for). TFT Firmware: To install the firmware, simply copy the files from the MKS TFT ROOT folder directly into a clean and formatted SD card. Insert the SD card into the MKS TFT, and voila! V6 Carriage https://www.thingiverse.com/thing:4324649