MP Delta Mini - Glass Bed Clip w/ M3 Screw Holes

thingiverse

This is a remix of Glass bed clips from gasstationwithoutpumps. Adding positive clamping to the glass! It utilizes six M3 flat head allen screws to securely hold down the glass bed plate. Several other minor modifications were made to the design as well, eliminating the need for overhangs. **Important: You will need to remove the bed from the machine before proceeding, drill and tap holes for the M3 screws.** I obtained my glass from Amazon at [this link](https://www.amazon.com/gp/product/B075B1R9YZ/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1). Alternatively, you can purchase an additional OEM bed plate from [here](https://gigdigit.com/bed-build-plate-mp-mini-delta-heater-sold-separately/). I use a M3 tap that drills and taps all in one. Amazon at [this link](https://www.amazon.com/Migiwata-Metric-Spiral-Combination-M3-M10/dp/B07122KD34/ref=sr_1_5?ie=UTF8&qid=1539618116&sr=8-5&keywords=m3+tap) and Harbor Freight at [this link](https://www.harborfreight.com/metric-drill-tap-deburr-bit-set-95529.html) sell them. ### PARTS NEEDED: - 3x printed clamp clips - 6x M3x6mm flat head screws - 1x Glass build plate - 1x M3 tap ### ASSEMBLY: - Remove the build plate from the machine, leaving the heater in place if desired. Unplug it to avoid any issues. - Center the glass on the aluminum build plate and clamp it down using binding clips. - Place one clip in its location and mark the spot where you will drill and tap the holes. - Insert screws into the first hole, then mark and drill the next one. Repeat this process for the remaining holes. ### NOTE: You must slide the fan shroud up as far as possible to avoid hitting the clips. Alternatively, you can cut off 1/8" from the bottom of the fan shroud to ensure a smooth fit.