Mouse Bungee (With Springs)

thingiverse

I designed a mouse bungee that fit some springs I found at Home Depot. I tried to make it look minimalist and clean, but still a little stylish. The base is designed to hold the stock weights that come in cyberpower pc wired mice. It might work without the weights, but it may be a little top heavy. I would recommend either finding other weights to fit in the base, or printing with 100% infill to increase base weight. The springs I used are Everbilt 13/32 in x 2-2/3 in x .047 in compression springs, with a work load limit of 12.35 lbs. The pictures of the white print are my initial attempt, printed at .2 mm layer height, and the black is the second attempt at .1 mm layer height. The .2 mm layer height print used a brim only, but the .1 mm layer height used a raft, because the edges come to a sharp point. The bottom cleaned up quite well with a little sanding. PRINTED ON CREALITY CR-6 SE, NOT CR-10 (Thingiverse does not have the option for this printer yet)