Mounts for heatbed's insulation

cults3d

Supports for heatbed's thermal insulation made from cork boards. Warning: There is an error on the pics, the PCB is upside down. The copper must be on the side of the cork.(see the picture provided in the Notes/Custom section, "Mount assembled" for use it in the right way) V.1 and V1.1 Removed. V.1.2 29-03-18 What is needed: Print "support insul v1.2_fixed.stl" x 3 Print "support insul v1.2_STRAIN_fixed.stl" x 1 Print "CR-10_Y-Axis_wire_restrain_bracket_cover.stl" x 1 Cork boards 6mm x 2 (310mm x 310mm for CR-10) PCB single face x 1 (same size than cork board for CR-10, at least 260mm x 260mm min). M4 brake Nuts x 4 (M4 screw on CR-10) Countersunk flat socket head screw M4x50mm x 4 (CR-10 Screw may be too short) Washers size Id: 5mm Ed :9.8mm Remember: Follow safe work procedures. Always wear the right personal protective equipment and clothing. Enjoy your self Don't forget to tip your designers Warning: Strain relief bracket is designed for a Creality CR-10 heatbed. Glass plate bed holder for this set can be found here