Mounting ring - suspension microphone

prusaprinters

<p>This is a replacement part for an se.electronic<strong>condenser microphone suspension support</strong>. You will need to print 2 of these rings to replace the shock mounted cord. This is printed using Sain Smart black TPU (Thermoplastic polyurethane). The cross section of the ring is square 3 mm x 3 mm and is printed hollow. The inner circumference is 407 mm which translates to a radius of 64.78 mm. The TinkerCad file has been made public and can be obtained here.</p> <p><a href="https://www.tinkercad.com/things/gB5GwGnmg9d-se-electronics-microphone-support">https://www.tinkercad.com/things/gB5GwGnmg9d-se-electronics-microphone-support</a></p> <h3>Print instructions</h3><p>No rafts / no supports<br/> <strong>Resolution:</strong> 0.3 mm<br/> <strong>Infill:</strong> 0% (hollow)</p> <p><strong>Filament:</strong> Sain Smart TPU black</p> <p><strong>Notes:</strong></p> <p>Need to coat the printing area with glue from a glue stick. This allows the piece to be easily removed. Don't forget to put some near the start position as well.</p> <p>I used Slic3r PE to prepare the print file -<br/> Using SemiFlex or FLEX 98A default filament profile.</p> <p>Modity the vertical shell perimeter to 1<br/> and the horizontal shell bottom layer to 1 as well as the top layer to 1.<br/> This hollow square tube ensures the elasticity that is necessary for the part.</p> <p>All the speed settings were dropped to 18 mm/s.</p>