Mounting Bracket for FPV Camera AKK KC53

prusaprinters

<p>The simple case for the FPV Camera AKK KC53 by <a href="https://www.printables.com/social/208003-maschinist-raumzeitpiraten">Maschinist RaumZeitPiraten</a> is great!&nbsp;</p><p>However, I was not using Lego. I used my soldering iron to place some heat set inserts, and created this glue-able mounting bracket to fix my FLV camera to my <a href="https://www.eclipson-airplanes.com/modela">Eclipson Model A RC plane</a> (also 3D printed).</p><p>Print Settings:</p><ul><li>❗ &nbsp;Be sure to use PETG or higher temp plastics for the case. This camera can get hot enough to deform PLA. The bracket can be printed in PLA.</li><li>0.15 - 0.3mm layer height</li><li>NO supports needed</li><li>15% or higher infill</li></ul><p>I used;</p><ul><li>(2) - 3 x 4mm Socket Head Cap Screws&nbsp;<ul><li>❗ I don't recommend longer screws, as they may push into the camera, causing a short and bricking it. As always, use at your own risk.</li></ul></li><li>(2) - [initeq] M3-0.5 Threaded Heat Set Inserts for 3D Printing</li></ul><p>&nbsp;</p>