Mount Servo 9g Leveler

cults3d

Leveling your 3D printer is a crucial step to ensure that it prints accurately and consistently. For Prusa and Grabber models, you can use the following leveling procedure: 1. Start by unplugging the power cord from the printer's motherboard. 2. Locate the three leveling screws on the X-axis carriage. These are usually marked with an "X" or a small screwdriver icon. 3. Turn each screw clockwise until it stops, then turn it counterclockwise for one to two turns. This will loosen the screws and allow you to adjust the leveling. 4. Use a caliper or a digital micrometer to measure the distance between the nozzle and the print bed at multiple points. The ideal distance is usually around 0.1-0.2 mm. 5. Make adjustments to the leveling screws as needed, tightening or loosening them in small increments until you achieve the desired level of precision. Some users prefer to use a separate leveling tool, such as the Prusa i3 leveling system, which can be attached directly to the printer's frame and provides more precise measurements.