Mount remix-Prusa MK3S Raspberry Pi Camera Mount
prusaprinters
<p>This remix allows you to use M3 x 20mm screws for the entire camera mount, the mount was modified since the hardware stores around me do not carry M3x25mm screws.</p> <p>This remix is an adjustment to the <code>raspberry_camera_mount _clip_</code> (<code>right</code> and <code>left</code>) parts in <a href="https://www.prusaprinters.org/prints/20431-prusa-mk3s-raspberry-pi-camera-mount-by-clip-faste">https://www.prusaprinters.org/prints/20431-prusa-mk3s-raspberry-pi-camera-mount-by-clip-faste</a>; the adjustment allows using M3x20 screws for all parts.</p> <h3>Print instructions</h3><p>To use M3x20 screws for the camera mount, print either the <code>raspberry_camera_mount_clip_right-adjusted-20mm-screw</code> or <code>raspberry_camera_mount_clip_left-adjusted-20mm-screw</code> from this remix, along with the other parts from <a href="https://www.prusaprinters.org/prints/20431-prusa-mk3s-raspberry-pi-camera-mount-by-clip-faste">https://www.prusaprinters.org/prints/20431-prusa-mk3s-raspberry-pi-camera-mount-by-clip-faste</a></p>
With this file you will be able to print Mount remix-Prusa MK3S Raspberry Pi Camera Mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Mount remix-Prusa MK3S Raspberry Pi Camera Mount.