Mount for Suunto Dive Compass - Retractor attachment

prusaprinters

<p>I've been meaning to convert my dive compass to work with a retractor for a while and after finding the excellent bungee converter by Crazy_Diver_84 here <a href="https://www.thingiverse.com/thing:2641327">https://www.thingiverse.com/thing:2641327</a></p> <p>I decided to make a modified version of it.</p> <p>I've tightened up the fit as I found it was a little loose, and this also meant I could use TPU as well as PLA for printing.</p> <p>I also added a section for a strap to go through (25mm webbing). For my use I've attached a stainless steel D ring, but you could use velcro, eyelets or whatever you prefer.</p> <p>I also did a version with 50mm webbing, but that was too wide to be practical.</p> <p>I left the bungee holes in place as that allowed for 2 options with a single mount, which you don't get from the commercial versions.</p> <p>Photo's show it printed in both TPU (orange) and PLA (White), both are a good fit, but right now I'm favouring PLA whilst it's underwater due to the additional stiffness. I may make a further modification to stiffen the walls when using TPU, but this is my personal preference.</p> <p>Strap was stitched by hand using a speedy stitcher.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Anycubic</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>All-metal Mega</p></div> <p><strong>Rafts:</strong></p> <p>Doesn't Matter</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div> <p><strong>Resolution:</strong></p> <p>0.2mm</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>25%</p></div> <p><strong>Filament:</strong> Anycubic TPU / PLA <br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>TPU needs a little work with a razor blade / craft knife to open up the window due to the supports, but otherwise prints nicely. </p></div> </p></p></p> Category: Sport & Outdoors