Mount for Supernight PSU
thingiverse
This was primarily designed for Solidoodle printers, but it will fit other models if needed. Give a "Made" to confirm your print is successful. This is the easiest and most affordable mounting option for the Supernight I've tried so far. After printing, line up the bottom part to ensure it's straight and make three mount holes in the frame with a pencil. Drill out the three holes to accept M3 screws, then slide the PSU into its cradle. Place the top part over your desired location, but do not cover the venting slits for proper cooling of the unit. Mark the two mounting holes as you did with the lower portion, remove the Supernight, and drill the holes for the top. Secure the top in place and drop in the PSU once it's locked in. Your installation is now complete! Hardware needed: • 5 M3x12mm socket cap screws (M3x16mm will work too) • 5 M3 nuts
With this file you will be able to print Mount for Supernight PSU with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Mount for Supernight PSU.