Mount for skinned Logitec C270 camera
thingiverse
Print and add a piece of 3M double-sided foam tape to the inside, then stick the camera to the tape. Cable goes through the hole in the back. The ground wire will need to be de-soldered and then re-soldered to the board. Slots in the back are for a small zip-tie to pass through. The zip-tie is to hold the cable to provide strain relief. We use the little nub in the back is to help secure the camera mount to a second printed mount designed for whatever we're mounting the camera to. We design a matching divot into this piece to help align the camera. The two pieces are held together with superglue.
With this file you will be able to print Mount for skinned Logitec C270 camera with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Mount for skinned Logitec C270 camera.