Mount for Nimble V1 on Tevo Little Monster

thingiverse

Changelog: 1.2 Be aware that the mounting screws for the Nimble shipped are a little too long. Use M3x35 mm or so to avoid hitting the effector. 1.1 Changed the 4 mounting screws to mount it on the effector. Some reported that the bolts were too close together. Increased the bolt circle. A mount to put the Nimble on a Tevo Little Monster using the original effector is provided. There are two parts to this mount: The Base Mount, printed upside down, and the Position Plate. This last part is glued onto the Base Mount and ensures the Nimble is positioned perfectly in relation to the Hot End. The Base Mount is printed with embedded nuts. Pause the print at Z height of 4.357 or layer number 22 (roughly). Insert the nuts into the 2 hex holes and continue the print. A smaller mount designed for SLS printing is also available. This is the Shapeways Mount.STEP file, uploaded to Shapeways and available here: http://shpws.me/PidJ Mounting instructions are as follows: Insert PTFE tubing in the hot end and slide the mount over the tubing into position. Use 4 M3x25 mm screws to fasten the mount to the effector. Slice off the ptfe tubing flush with the top of the mount and install the Nimble. The STL models have been checked and optimized. The parts that need a different orientation to print properly are rotated to the preferred printing position. The Nimble Extruder is available, weighing less than 27 grams on your carriage/effector. It has ample torque and can be mounted in multiple orientations. Purchase the Nimble from Zesty Technology at https://zesty.tech.