Mount for 2020 Extrusion I-Type 5

thingiverse

Needed a mount for my filament spool holder and came up with this design. Edit: September 8th, 2015: Added a mount based on the one without guide, with rounded top edges. Only made visual changes. Edit: September 7th, 2015: Added a mount without the middle and side guides. Instructions Do yourself a favor and print it at 100% infill. Or at least high. Printed it with a layer height of 0.2mm. The mount with middle and side guides might need supports when printing. There's room for an M8 locking nut in the mounting piece, but I think a normal M8 nut would work as well (since the standard type is smaller). Bill of Materials: 2x M8 locking nuts. OR 2x M8 standard nut. (I recommend locking nuts) Some 8mm threaded rod depending on your needs. 2x M3 screws and 2x T-nuts to fix the mount to the 2020 extrusion Using this for an Ultimaker 2 Aluminum Extrusion 3D printer: At least one of the mounts must be without guides, or there isn't enough room for them.