Motorola MB8611 / MB8600 / MB7621 Cable Modem Rack Mount 1U-ish

prusaprinters

<p>Rack mount for the Motorola MB8611 / MB8600 / MB7621 cable modem, with ventilated shelf and keystone jack. Also has a screw mount hole to mount the modem directly to the modem tray.</p><p>You must remove the base/stand of the modem in order to fit it in the tray, there are 2 screws hidden under the label on the bottom of the base, you can use one of these screw holes to mount the modem to the tray.</p><p>Use 8 x 8mm M3 screws and nuts to screw the arms, and longer (12mm and 15mm) M3 screws to secure the cable modem to the tray.</p><p>This is "1U-ish" height, which means although the faceplate and mounting holes are designed for 1U, the actual modem itself sits very slightly taller than 1U (around 3-4mm). I therefore recommend mounting this at the top of the rack, or below a blank/brush slot in your rack. Feel free to remix to make this 1.3U/1.5U/2U for more flexibility.</p><p>Designed to be printed with no supports in PLA or PETG with the face plates facing down on the printer bed. I printed with Prusament Jet Black PLA, 0.4mm nozzle, 0.3mm layer height.</p><p>Shout out to mmason for the keystone jack mount template (https://www.thingiverse.com/thing:3562334).</p>