Motorola / Arris SurfBoard SB6141 Modem Mounting Bracket (68mm)

prusaprinters

<p>Original credit goes to: <a href="https://www.youmagine.com/designs/surfboard-sb6141-mounting-bracket">https://www.youmagine.com/designs/surfboard-sb6141-mounting-bracket</a> (jbolonski).</p> <ul> <li>6141_Mount.stl: Original from the site above </li> </ul> <ul> <li>6141 Mount 4mm Base Depth.stl: additional 1mm of base and screw holes are converted to fit a small sheet metal screw instead of a beveled screw. Screw holes are slightly larger for better fitment. 4mm plate thickness, 3mm screw head depth, and 1mm of base to have the screw hold (screw holes are slightly larger than the 5mm stl file and will fit a small piercing sheet metal screw). </li> </ul> <ul> <li>6141 Mount 5mm Base Depth.stl: Thicker base and screw holes are converted to fit a small sheet metal screw instead of a beveled screw. 5mm plate thickness. 3mm screw head depth, and 2mm of base to have the screw hold. </li> </ul> <h3>Print instructions</h3><h3>Category: Organization Print Settings</h3> <p><strong>Printer Brand:</strong> Ultimaker</p> <p><strong>Printer:</strong> <a href="http://amzn.to/2BfKabj">Ultimaker 3</a></p> <p><strong>Rafts:</strong> Doesn't Matter</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> .2</p> <p><strong>Infill:</strong> 10%</p> <p><strong>Notes:</strong></p> <p>ran at draft/high speed and quality of the main part was fine for it's intended purpose, HOWEVER, the bump outs were not precise enough (they were a little off center and warped). I recommend printing those layers at a much lower speed - I'll try another print at a slower speed to compare the quality.</p>